Service Hotline : +86-769-82916569
Welcome To Dongguan Fengyan Precision Mould Co., Ltd.
Your current location:Home / News / Company dynamics
Several methods for fine positio...
Source:FYC Click: second

After the printed circuit board (PCB) is completed, electronic components must be attached to form a functional printed circuit assembly, or PCA (sometimes called a "printed circuit board assembly" PCBA). In through-holeconstruction, component leads are inserted in holes. In surface-mountconstruction, the components are placed on pads or lands on the outer surfaces of the PCB. In both kinds of construction, component leads are electrically and mechanically fixed to the board with a molten metal solder.
There are a variety of soldering techniques used to attach components to a PCB. High volume production is usually done with SMT placement machine and bulk wave soldering or reflow ovens, but skilled technicians are able to solder very tiny parts (for instance 0201 packages which are 0.02 in. by 0.01 in.) by hand under a microscope, using tweezers and a fine tip soldering iron for small volume prototypes. Some parts may be extremely difficult to solder by hand, such as BGA packages.

Often, through-hole and surface-mount construction must be combined in a single assembly because some required components are available only in surface-mount packages, while others are available only in through-hole packages. Another reason to use both methods is that through-hole mounting can provide needed strength for components likely to endure physical stress, while components that are expected to go untouched will take up less space using surface-mount techniques.

Label: 装订 装订机 要求
Recommended reading
Dongguan Fengyan Precision Mould Co., Ltd. Guangdong ICP No. 19101272-1  Technical Support: Tuohai Network